Huawei Optical Network Unit Gpon/Epon ONU Smartax Ma5621A

Huawei Optical Network Unit Gpon/Epon ONU Smartax Ma5621A

The Meizo R68J is a ruggedized enterprise-grade Category 6 4G LTE Router with LTE-Advanced support. With 2 LAN ports and Extended Range WiFi, it provides more connectivity options and flexibility for those looking to get the most out of their high-speed internet experience. The router CPU is...
Chat Now

Product Details

Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for Smart Vending Solutions, 4G VPN Firewall, M2M IoT Router. We are willing to cooperate sincerely with friends and partners from all over the world to create a great business. Our products have high starting point, high requirements and high standards. We don't have gorgeous language, but we have excellent quality. We will serve you wholeheartedly. Our company continuously develops and researches new products to meet market demand when exporting sophisticated products.

The Meizo R68J is a ruggedized enterprise-grade Category 6 4G LTE Router with LTE-Advanced support. With 2 LAN ports and Extended Range WiFi, it provides more connectivity options and flexibility for those looking to get the most out of their high-speed internet experience. The router CPU is using Broadcom chipset, integrated with Ethernet, SIM, VPN, VRRP, WiFi, and Serial port services. By owning hardware and software watchdog, ensures the router to access internet all the time.


Main Features

Hardware Specifications

Software Functions

● Support public and private APN network
● Dedicated hardware and software watchdog are designed to support system running reliable.
● ICMP detection and Heartbeat detection ensure the router to be always on line.
● Reboot the router remotely via SMS.
● Incorporate Virtual Router Redundancy Protocol (VRRP), facilitating 3G/4G WAN backup services to existing fixed line routers, providing both WAN and router redundancy to critical business applications.
● Offers business grade security and advanced routing features IPSec (3Des and AES), L2TP, PPTP, GRE as standard.
● Low-voltage, over current, over voltage, anti-reverse protection
● Wide Power Input DC7-36V
● Standard RS232/485 interface to connect with serial devices.
● Router Factory Default Settings can be configured freely.
● System logs can be viewed from local or remote.
● Support WLAN(300Mbps 802.11b/g/n)
● Support SNMP v1/v2/v3
● LEDS for status monitoring (showing Power, System, Internet, VPN, Signal strength).

● RAM:512Mbit FLASH:128Mbit
● Input DC 7-36V(Standard DC12V)
● Storage temperature:-40℃~80℃
● Work temperature:-30℃~70℃
● Humidity:<95%
● Unit size L*W*H:150*116.2*23.8mm
● Metal Shell, IP30
● Package weight:830g
● 1 SIM card slot
● 2 LAN 10/100Mb RJ45 port
● 1 RS232 or RS485 serial port
● ANT1 for Cell, ANT2,3 for WiFi
● Electrostatic discharge immunity:EN6100-4-2, level 2
● RFEMS:EN6100-4-3, level 2
● Surge:EN6100-4-3, level 2
● PFMF:EN6100-4-6, level 2
● Shockwave immunity:EN6100-4-8, Horizontal / vertical direction 400A/m(>level 2)
Physical property
● Shockproof:IEC60068-2-27
● Drop test:IEC60068-2-32
● Vibration test:IEC60068-2-6

● IPSec client
● PPTP client
● L2TP server and client
● GRE client
● Transmitting power: 17dbm
● Distance:Cover a radius of 100 meters in open area test
● Allow 50 users to access in theory
● Port Mapping
● Port Triggering
● IP filtering
● MAC filtering
● URL filtering
● Manage uplink/downlink bandwidth via port or IP
● Web
● Telnet
● TR-069 platform
● Static Routing
● Policy-Based Routing.
● Dynamic Routing


Frequency & Band



WiFi (-W)




● FDD-LTE: 2100MHz(B1), 1800MHz(B3), 850MHz(B5), 2600MHz(B7), 900MHz(B8), 800MHz(B18), 800MHz(B19), 1500MHz(B21), 700MHz(B28),
● TDD-LTE: 2600MHz(B38), 1900MHz(B39), 2300MHz(B40), 2500MHz(B41)
● WCDMA: 2100MHz(B1), 850MHz(B5), 850MHz(B6), 900MHz(B8), 1700MHz(B9), 850MHz(B19)

DC-HSPA+: 5.76Mbps/42Mbps

Work:0.46A@12V DC
Peak:0.58A@12V DC

802.11n 300Mbps Option

RS232/RS485 Option

US/EU standard
Input: AC100~240V
Output: DC12V Option


● FDD-LTE: 2100MHz(B1),1900MHz(B2), 1800MHz(B3),AWS(B4), 850MHz(B5), 900MHz(B8),700MHz(B12), 700MHz(B13), 700MHz(B17), 800MHz(B20) ,1900MHz(B25) 800MHz(B26), 700MHz(B29), 2300MHz(B30)
● TDD-LTE: 2500MHz(B41)
● UMTS/HSPA+: 2100MHz(B1), 1900MHz(B2), AWS(B4), 850MHz(B5), 900MHz(B8) 

DC HSPA+:5.76Mbps/42Mbps

Work:0.41A@12V DC
Peak:0.50A@12V DC

ATM (Asynchronous Transfer Mode) Tutorial-Network Architecture,cell,addressing,interfaces
This page of tutorials section covers ATM (Asynchronous Transfer Mode) tutorial. It covers ATM cell, ATM addressing formats, ATM network architecture and ATM network interfaces etc. The Asynchronous Transfer Mode tutorial provides link to ATM protocol layers, ATM services etc.

In the year 1980, ITU-T has initiated efforts to develop a network which can transport voice, video and data simultaneously from source to destination. As a result B-ISDN (Broadband Integrated Services Digital Network) has been developed. The B-ISDN combines telephony network, data network and cable TV network in a single network. ATM as well as SONET/SDH are behind the success of B-ISDN.


The same is shown in the figure-1. Unlike Synchronous Transfer Mode where in each source will get periodic assignment of bandwidth similar to TDM, Source in ATM packetizes data into smaller fixed size cells and cells are sent only if there is data to be transmitted. In ATM each of the cells will have its own header as described later.


Following are the silent features of ATM (Asynchronous Transfer Mode):

• ATM uses Virtual Circuit Packet Switching. It reserves capacity for the virtual circuit.
• Packets are known as cells in ATM. The smaller packets are good for voice as well as video transmissions. One ATM cell consists of header (5 bytes) and data payload (48 bytes).
• It allows multiple logical connections to be multiplexed over single physical interface.
• It is a connection oriented technology.
• As mentioned it provides dynamic allocation of bandwidth for efficient traffic management.
• Supports minimum flow control and error control capabilities.
• Supports LAN, CAN and WAN
• ATM can be deployed in private, public or hybrid networks.


• In ATM (Asynchronous Transfer Mode) logical connections are known as virtual channel connections or VCCs. The VCC is similar to virtual circuit (VC) in packet switched network. It is unit of switching used in ATM network.

• Initially VCC is established between end users in the network.

• After the VCC connection is established variable rate and fixed size cells are exchanged.

• Here VPC i.e. Virtual Path Connection is combination of VCCs having same end points or destinations. Hence all the ATM cells travelling through VCCs in one common VPC are switched together.

• Virtual path is identified by VPI and Virtual Channel is identified by VCI as mentioned below.
➨VPI (Virtual Path Identifier) identifies virtual path (8/12 bits in size).

➨VCI (Virtual Channel Identifier) identifies virtual channel in a virtual path (16 bits). 

ATM Network Architecture and network interfaces


• The figure-2 depicts ATM (Asynchronous Transfer Mode) network architecture with interfaces. There are two types of Virtual connections supported by ATM network viz. PVCs and SVCs.

• PVCs are referred as Permanent Virtual Connections. They are similar to leased lines used between users. The PVCs are set up by the operator.

• SVCs are referred as Switched Virtual Connections. They are set up and teared down based on end user demand.

• The ATM network interfaces include UNI (User-Network Interface) , NNI (Network-Network Interface) and B-ICI (Broadband Intercarrier Interface). User interacts with network using UNI interface to establish SVC connection. The ATM switches interact using NNI interface in order to exchange information. ATM switches belonging to another public networks will communicate using B-ICI interface.

ATM Cell-UNI cell vs NNI cell

As mentioned earlier ATM cell is composed of header and payload part. Header is of size equal to 5 bytes or octets and payload which carrier information from upper layers is of size equal to 48 bytes. Header of ATM (Asynchronous Transfer Mode) cell varies in UNI interface and NNI interface. The same have been shown in the figure below. Let us understand difference between UNI cell header and NNI cell header. As shown, GFC field is used only in UNI cells. At NNI, GFC byte is used to incorporate additional VPI.


UNI Cell Header field




4 bits

Generic Flow Control


(8 bits for UNI or 12 bits for NNI)

Virtual Path Identifier, It is a routing field for the network.


16 bits

Virtual Channel Identifier, It is used for routing to and from end user. It acts as SAP(Service Access Point).


3 bits

Payload Type


1 bit

Cell Loss Priority , value of 0 indicates that cell should not be discarded. Value of 1 indicates that cell can be discarded.


8 bits

Header Error Control, It is used to correct single bit errors in the header. It is also used to detect double bit errors.

NNI Cell Header field




8/12 bits

Virtual Path Identifier


16 bits

Virtual Channel Identifier


3 bits

Payload Type


1 bit

Cell Loss Priority


8 bits

Header Error Control

ATM Addressing Formats-DCC, ICD, E.164


All the ATM (Asynchronous Transfer Mode) addresses are of 20 byte in size. Source and destination addresses are used while establishing a connection. There are three types of formats used for ATM address viz. NSAP (Network Service Access Point), DCC and ICD.
• ATM end points use NSAP format. ISDN telephone numbers use the format E.164.
• DCC (Data Country Code) format is used for public networks.
• ICD international Code Designator) format is used for private networks.
Following table describes fields used in ATM addresses.





1 byte

Authority and Format Identifier, tells which addressing scheme is used.


2-8 bytes

Initial Domain Identifier, Identifies a domain within scope of addressing authority.


4-10 bytes

high Order bits of domain specific part, same as network prefix of IP address


6 bytes

End System Identifier, Same as host number of IP address


1 byte

Selector, for endsystem use only

ATM Protocol Stack


ATM protocol stack consists of three main layers viz. AAL Layer, ATM layer and physical layer. Above AAL layer upper layers reside. Following are the functions of each.

➨AAL layer does encapsulation of user level data. AAL layer breaks the upper layer data at the sender side into small size ATM cells and reassembles the cells at the receiver side.

➨ATM layer take care of transport of 53 byte ATM cells created by AAL layer across the ATM network. It does multiplexing of multiple logical channels on one single physical channel. It provides different services for ATM cells.

➨ATM physical layer does encoding (at transmit end) and decoding (at receive end) of bits based on physical medium used for transportation of ATM cells.

With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for Chinese wholesale Huawei Optical Network Unit Gpon/Epon ONU Smartax Ma5621A. We emphasize technology value-added, and we value the business strategies focusing on core competitiveness. We have strong new product design and development capabilities because of our professional research and development team.
Hot Tags: ruggedized router, China, suppliers, manufacturers, factory, buy, customized, price, Industrial IoT Router, 4G SIM Router, M2M Router Gateway, M2M Gateway, Industrial 4G Router, MPLS Managed Service


You Might Also Like